3G Opaque Inkjet Printable Transfer Paper

3G Opaque Inkjet Printable Transfer Paper

  • $2.50
Shipping calculated at checkout.


Neenah 3G Opaque transfer paper is designed  to transfer inkjet photo-quality images and graphics onto dark-colored materials.  It is newly improved with a lighter hand and drape. The result is a soft, supple transferred image that is vibrant and durable and able to withstand many laundry cycles.

This product is printable by most desktop and roll fed inkjet printers. 

Store Heat Transfer Paper in a cool, dry area in a poly bag and do not remove until you are ready to use.

Watch this Neenah product video for instructions and tips.  Note:  Information specific to the 3G Opaque product starts at 2:30 mark in the video

Printing Instructions:

  • Do NOT mirror image your artwork. Use correct orientation. Single-sheet feeding is recommended.

  • Set printer for normal image quality (do NOT over saturate with ink).
  • Print your image on the white imaging side of the sheet (not the side with gridlines).

Application instructions (home iron)

  • Trim Your Printed Design 
    Before transferring, cut as close to the image as possible, leaving no margin. For best results (optional), use a design with rounded edges to avoid corner lift-off after washing
  • Peel Off Lined Paper Backing
    Slightly tear the backing paper on the edge of the paper and gently peel away.  
  • Place design right side (image side facing you) on garment.
  • Set iron dial at highest setting with steam off.
  • Cover design with Kraft paper or non-stick cover sheet
  • Place on flat, hard surface (ironing board not recommended)
  • Press iron with medium pressure  for 30 sec on each section of design.
  • Peel carrier COLD

Application Instructions (heat press)

  • Trim Your Printed Design 
    Before transferring, cut as close to the image as possible, leaving no margin. For best results (optional), use a design with rounded edges to avoid corner lift-off after washing
  • Peel Off Lined Paper Backing
    Slightly tear the backing paper on the edge of the paper and gently peel away.  
  • Place design right side (image side facing you) on garment.
  • Preheat garment for 2-3 seconds. 
  • Apply design 30 seconds at 350°F/177°C using medium pressure (30 to 45 psi/2 to 3 bar)
  • Peel carrier COLD

Applies to:

100% cotton
Poly/cotton blends
100% polyester

Laundering:

  • Wait 24 hrs after application before first wash.
  • Turn garment inside out and wash in cold water using a mild detergent.
  • Do not use bleach or liquid fabric softener
  • Dry on low-heat setting.
  • If you intend to iron the transferred area, ensure that the image is covered with parchment paper before ironing.