EasyWeed® STRETCH Heat Transfer Vinyl

EasyWeed® STRETCH Heat Transfer Vinyl

  • $5.00
Shipping calculated at checkout.


The most trusted heat transfer vinyl brand in the world

Siser EasyWeed Stretch is thin, stretchy and colorful. Perfect for performance apparel.

Layerable, CPSIA compliant, (actual width 14.75")

Two tips for cutting and applying EasyWeed Stretch:

  1. Go slow!  Because of the elasticity a fast blade can bounce on the material instead of gliding and cutting smoothly through the material.
  2. To avoid lifting, FIRM pressure is the critical piece to ensure good adhesion even if temperature and time are accurate.  Using a heat transfer pillow inside your garment can help achieve adequate pressure

Below is a rather lengthy, but very informative video from Siser with all the do's and don't to ensure successful application. 

Cutter Settings:  

     Cricut Blade: Standard
    Setting:  Iron-On
    Silhouette Cameo

    Blade: Standard, 3
    Material: Heat Transfer, Smooth
    Speed: 8
    Force: 6

    Brother Scan N Cut

    Blade:  Standard, 2
    Cut Speed:  1
    Cut Pressure: 1

     

    Application instructions (home iron)

    • Cut in reverse
    • Weed excess material
    • Set iron dial between Cotton and Linen
    • Cover design with Kraft paper or non-stick cover sheet
    • Place on flat, hard surface (ironing board not recommended)
    • Press iron with medium/firm pressure (do not slide iron)
    • Press each section of design for 10-15 seconds
    • If areas of design lift after application, replace cover sheet
    and re-press for 5-10 seconds
    • Peel carrier hot or cold

    Application Instructions (heat press)

    • Cut in reverse
    • Weed excess material
    • Preheat garment for 2-3 seconds
    • Apply design at 305°F/150°C
    • Use firm pressure for 10-15 seconds
    • Peel carrier hot or cold