EasyWeed® STRETCH Heat Transfer Vinyl 15" Rolls FURTHER PRICE REDUCTIONS

$11.00
Save $2.50

Shipping calculated at checkout.

Quantity

Siser - The most trusted heat transfer vinyl brand in the world

Siser EasyWeed Stretch is thin, stretchy and colorful. Perfect for performance apparel.

Layerable, CPSIA compliant, (actual width 14.75")

Two tips for cutting and applying EasyWeed Stretch:

Go slow! Because of the elasticity a fast blade can bounce on the material instead of gliding and cutting smoothly through the material.
To avoid lifting, FIRM pressure is the critical piece to ensure good adhesion even if temperature and time are accurate. Using a heat transfer pillow inside your garment can help achieve adequate pressure

Below is a rather lengthy, but very informative video from Siser with all the do's and don't to ensure successful application.

Cutter Settings:

Cricut	Blade: Standard Setting: Iron-On
Silhouette Cameo	Blade: Standard, 3 Material: Heat Transfer, Smooth Speed: 8 Force: 6
Brother Scan N Cut	Blade: Standard, 2 Cut Speed: 1 Cut Pressure: 1

Application instructions (home iron) revised

• Cut in reverse
• Weed excess material
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with FIRM pressure (do not slide iron)
• Press each section of design for 20 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier hot or cold

Application Instructions (heat press)revised

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use FIRM pressure for 20 seconds
• Peel carrier hot or cold