Cart 0
EasyReflective® Heat Transfer Vinyl

EasyReflective® Heat Transfer Vinyl

Shipping calculated at checkout.

The most trusted heat transfer vinyl brand in the world

EasyReflective®  highly reflective glass bead technology helps keep you safe by increasing visibility in low lighting for garments, pet clothes and accessories.  The pressure sensitive carrier aids in weeding. 

Layerable as top layer only.

Actual width (19.66")

    Cutter Settings:
       Cricut Blade: Standard
      Setting:  Iron-On
      Silhouette Cameo

      Blade: Standard, 3
      Material: Heat Transfer, Smooth
      Speed: 8
      Force: 6
      Brother Scan N Cut

      Blade:  Standard, 2
      Cut Speed:  1
      Cut Pressure: 1

       

      Application instructions (home iron)

      • Cut in reverse
      • Weed excess material
      • Set iron dial between Cotton and Linen
      • Cover design with Kraft paper or non-stick cover sheet
      • Place on flat, hard surface (ironing board not recommended)
      • Press iron with medium/firm pressure (do not slide iron)
      • Press each section of design for 10-15 seconds
      • If areas of design lift after application, replace cover sheet
      and re-press for 10 seconds
      • Peel carrier warm

      Application Instructions (heat press)

      • Cut in reverse
      • Weed excess material
      • Preheat garment for 2-3 seconds
      • Apply design at 305°F/150°C
      • Use medium pressure for 15 seconds
      • Peel carrier warm (at least 15 seconds off press)

      EasyWeed Glow Applies to:

      100% cotton
      Poly/cotton blends
      100% polyester
      Nylon (testing recommended)

      Laundering:

      Wait 24 hours before 1st wash
      Machine wash cold / mild detergent
      Can be machine dried on low, but hanging
      item to dry will preserve reflective quality
      Do not dry clean