Siser EasySubli™

Siser EasySubli™

  • $3.99
Shipping calculated at checkout.

Introducing Siser's new innovation - a heat transfer vinyl available in letter-size sheets that is receptive to sublimination inks.  If you have a sublimation printer you can now cost-effectively offer custom print and cut services using photos and vector graphics and clipart.  Although Siser has partnered with Sawgrass inks, you will get great results with your existing sublimation inks.  Best of all you are not limited to white polyester.  This innovative media can be applied almost any fabric including rayon and tri-blends and white and dark colors.

Depending on your design, EasySubli  Mask may or may not be required.  Be sure to watch the video below to learn more.

Please note that EasySubli  is NOT compatible with latex or Inkjet/toner based printers/copiers. 

Layering not recommended, CPSIA compliant, (actual size 8.4" x 11")

    Cutter Settings:
       Cricut Blade: Standard
      Setting:  Iron-On
      Silhouette Cameo

      Blade: Standard, 3
      Material: Flocked
      Speed: 8

      Brother Scan N Cut

      Blade:  Standard, 2
      Cut Speed:  1
      Cut Pressure: 1


      Application instructions (home iron)

      • Set iron dial between Cotton and Linen
      • Cover design with Kraft paper or non-stick cover sheet
      • Place on flat, hard surface (ironing board not recommended)
      • Press iron with medium/firm pressure (do not slide iron)
      • Press each section of design for 15 seconds
      • If areas of design lift after application, replace cover sheet
      and re-press for 5-10 seconds
      • Peel mask warm.

      Application Instructions (heat press)

       Weed excess material
      • Preheat garment for 2-3 seconds
      • Apply design at 311°F/155°C
      • Use medium pressure for 15 seconds
      • Peel mask warm if using.