StripFlock® Pro Heat Transfer Vinyl

  • $5.75
Shipping calculated at checkout.

The most trusted heat transfer vinyl brand in the world

Siser StripFlock® Pro is a completely upgraded product from their original StripFlock.  It is a textured HTV with a thicker suede-like feel.  

This new formulation can now be:

  • applied at a lower temperature of 311°F for 15 seconds.
  • peeled hot, which can significantly speed up the application process.

Like the original StripFlock, it can be layered upon itself.  Best of all, StripFlock® Pro is also CPSIA certified.  Watch for new colors coming soon!

Actual width 14.75"

Cutter Settings:

     Cricut Blade: Standard
    Setting:  Iron-On +
    Silhouette Cameo

    Blade: Standard, 4
    Material: Heat Transfer, Flocked
    Speed: 5
    Force: 6

    Brother Scan N Cut

    Blade:  Standard, 4
    Cut Speed:  1
    Cut Pressure: 2


    Application instructions (home iron)

    • Cut in reverse
    • Weed excess material
    • Set iron dial between Cotton and Linen
    • Cover design with Kraft paper or non-stick cover sheet
    • Place on flat, hard surface (ironing board not recommended)
    • Press iron with medium pressure (do not slide iron)
    • Press each section of design for 10-15 seconds
    • If areas of design lift after application, replace cover sheet
    and re-press for 5-10 seconds
    • Peel carrier hot or cold

    Application Instructions (heat press)

    • Cut in reverse
    • Weed excess material
    • Preheat garment for 2-3 seconds
    • Apply design at 311°F/155°C
    • Use medium pressure for 15 seconds
    • Peel carrier hot or cold

    StripFlock Applies to:

    100% cotton
    Poly/cotton blends
    100% polyester


    Wait 24 hours before 1st wash
    Machine wash warm or cold / mild detergent
    Dry on normal dryer setting
    Do not dry clean